LYRA DELOS動圈式唱頭
LYRA DELOS動圈式唱頭
日本LYRA 為一間高檔次動圈唱頭及模擬重播設備的生產商,自1985年起,設計及概念源自Mr.Jonathan Carr,每枚唱頭均由Mr.Yoshinori Mishime在日本親手制作及微調,以確保每枚唱頭皆在最高狀態下出廠。
我要購買
我要兌換
日本LYRA 為一間高檔次動圈唱頭及模擬重播設備的生產商,自1985年起,設計及概念源自Mr.Jonathan Carr,每枚唱頭均由Mr.Yoshinori Mishime在日本親手制作及微調,以確保每枚唱頭皆在最高狀態下出廠。
產品說明
Designer: Jonathan Carr
Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
Type: Medium weight, medium compliance, low-impedance moving coil cartridge
Frequency range: 10Hz - 50kHz
Channel separation: 30dB or better at 1kHz
Cantilever system: Solid boron rod with Namiki microridge line-contact stylu (2.5um x 75um) and one-point suspension,
directly mounted to cartridge body
Coil: 6N high-purity copper, 8.2ohms internal impedance, 9.5uH inductance
Output voltage: 0.6mV @ 5cm/sec. (CBS test record)
Compliance: Approx. 12 x 10 cm/dyne at 100Hz
Vertical tracking angle: 20 degrees
Cartridge body: One-piece machining from solid aluminum billet
Cartridge weight (without stylus cover): 7.3g
Recommended tracking force: 1.7g - 1.8g (1.75g preferred)
Recommended load directly into MC phono input: 91ohms - 47kohm
Recommended load via step-up transformer: 5 - 15ohm
Recommended tonearm: High-quality pivoted or linear (tangential) tone arm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment
Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (primary build)
Type: Medium weight, medium compliance, low-impedance moving coil cartridge
Frequency range: 10Hz - 50kHz
Channel separation: 30dB or better at 1kHz
Cantilever system: Solid boron rod with Namiki microridge line-contact stylu (2.5um x 75um) and one-point suspension,
directly mounted to cartridge body
Coil: 6N high-purity copper, 8.2ohms internal impedance, 9.5uH inductance
Output voltage: 0.6mV @ 5cm/sec. (CBS test record)
Compliance: Approx. 12 x 10 cm/dyne at 100Hz
Vertical tracking angle: 20 degrees
Cartridge body: One-piece machining from solid aluminum billet
Cartridge weight (without stylus cover): 7.3g
Recommended tracking force: 1.7g - 1.8g (1.75g preferred)
Recommended load directly into MC phono input: 91ohms - 47kohm
Recommended load via step-up transformer: 5 - 15ohm
Recommended tonearm: High-quality pivoted or linear (tangential) tone arm with rigid bearing(s), adjustable anti-skating force, preferably VTA adjustment