dCS Debussy DAC 數位類比轉換器
dCS Debussy DAC 數位類比轉換器
DebussyUSB數位類比處理器將會是未來音響系統的趨勢, Debussy結合了dCSRing DAC技術和dCS專利証號(GB0817141.5),讓USB與電腦連接的非同步模式,因此,DebussyUSB數位類比處理器能使任何數位訊源完美呈現並無限延伸。
DebussyUSB數位類比處理器將會是未來音響系統的趨勢, Debussy結合了dCSRing DAC技術和dCS專利証號(GB0817141.5),讓USB與電腦連接的非同步模式,因此,DebussyUSB數位類比處理器能使任何數位訊源完美呈現並無限延伸。
與電腦連結時,Debussy 會啟動USB非同步模式,提供電腦非同步模式訊號來同步電腦,如此,時鐘便能更為精準且jitter也更低。AES和SPDIF數位輸入介面是所有數位類比處理器的工業標準,因此,可以和其他的器材搭配使用。Debussy也可以外接任何一台dCS的主時鐘系統,讓它的表現效率更好。在未來,無論用dCS的CD片,還是透過電腦,Debussy的軟體、韌體都可輕易更新升級。
*- 榮獲TAS美國音響天書第209期"2010年最佳數位訊源大獎", 2011/01
*- 榮獲Hi-Fi News評選為"傑出產品", 2010/12
*- 榮獲Stereophile雜誌“ Digital Product of the Year 2011“*. 榮獲 Stereophile "2012年推薦器材獎",2012/10
Type |
Digital-to-Analogue Converter. |
Color |
Silver. |
Dimensions |
(W) 445mm x (D) 392mm x (H) 65mm (W) 17.6” x (D) 15.5” x (H) 2.6” Allow extra depth for cable connectors. |
Weight |
8.8kg/19.4lbs. |
Analogue Outputs |
Output Levels: 2V rms or 6V rms on all outputs, set by the Output Level switch on the rear panel.
Balanced Outputs - 1 stereo pair on 2x 3-pin male XLR connectors (pin 2 = hot, pin 3 = cold) These outputs are electronically balanced and floating, the signal balance ratio at 1kHz is better than 40dB Output impedance is 3 Ω , maximum load is 600 Ω (a 10k Ω load is recommended).
These outputs are electronically balanced and floating - the signal balance ratio at 1kHz is better than 40dB Output impedance is 3 Ω and maximum load is 600Ω (a 10kΩ load is recommended).
Unbalanced Outputs - 1 stereo pair of 2x RCA Phono connectors. Output impedance is 52Ω maximum load is 600 Ω (a 10kΩ load is recommended). |
Digital Inputs |
USB interface on a B-type connector will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 or 96kS/s. Operates in asynchronous mode.
2x AES/EBU on 3-pin female XLR connectors. Each will accept up to 24bit PCM at 32, 44.1, 48, 88.2 &96kS/s. OR as a Dual AES pair at 88.2, 96, 176.4 & 192kS/s.
2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each will accept PCM at 32, 44.1, 48, 88.2 or 96kS/s up to 24 bits. |
Word Clock I/O |
INPUT - Word Clock Input on 1x BNC connector. Accepts standard word clock at 32, 44.1, 48, 88.2 & 96kHz. |
Residual Noise |
Better than -100dB0 @ 20Hz - 20kHz unweighted.(6V Setting). |
Spurious Responses |
Better than - 100dB0 @ 20Hz - 20kHz. |
Filters |
2 filters on Debussy give different trade-offs between the Nyquist image rejection and the phase response. |
Software Updates |
Loaded from CD or Computer via USB. |
Local Control |
IR (RC5) or RS232. A dCS Premium remote control is available as an optional extra. |
Power Supply |
Factory set for 100, 115, 220 or 230 V AC, 49 - 62Hz. |
Power Consumption |
22 Watts typical/ 30 Watts maximum |
Type |
Digital-to-Analogue Converter. |
Color |
Silver. |
Dimensions |
(W) 445mm x (D) 392mm x (H) 65mm (W) 17.6” x (D) 15.5” x (H) 2.6” Allow extra depth for cable connectors. |
Weight |
8.8kg/19.4lbs. |
Analogue Outputs |
Output Levels: 2V rms or 6V rms on all outputs, set by the Output Level switch on the rear panel.
Balanced Outputs - 1 stereo pair on 2x 3-pin male XLR connectors (pin 2 = hot, pin 3 = cold) These outputs are electronically balanced and floating, the signal balance ratio at 1kHz is better than 40dB Output impedance is 3 Ω , maximum load is 600 Ω (a 10k Ω load is recommended).
These outputs are electronically balanced and floating - the signal balance ratio at 1kHz is better than 40dB Output impedance is 3 Ω and maximum load is 600Ω (a 10kΩ load is recommended).
Unbalanced Outputs - 1 stereo pair of 2x RCA Phono connectors. Output impedance is 52Ω maximum load is 600 Ω (a 10kΩ load is recommended). |
Digital Inputs |
USB interface on a B-type connector will accept up to 24 bit PCM at 32, 44.1, 48, 88.2 or 96kS/s. Operates in asynchronous mode.
2x AES/EBU on 3-pin female XLR connectors. Each will accept up to 24bit PCM at 32, 44.1, 48, 88.2 &96kS/s. OR as a Dual AES pair at 88.2, 96, 176.4 & 192kS/s.
2x SPDIF on 1x RCA Phono and 1x BNC connectors. Each will accept PCM at 32, 44.1, 48, 88.2 or 96kS/s up to 24 bits. |
Word Clock I/O |
INPUT - Word Clock Input on 1x BNC connector. Accepts standard word clock at 32, 44.1, 48, 88.2 & 96kHz. |
Residual Noise |
Better than -100dB0 @ 20Hz - 20kHz unweighted.(6V Setting). |
Spurious Responses |
Better than - 100dB0 @ 20Hz - 20kHz. |
Filters |
2 filters on Debussy give different trade-offs between the Nyquist image rejection and the phase response. |
Software Updates |
Loaded from CD or Computer via USB. |
Local Control |
IR (RC5) or RS232. A dCS Premium remote control is available as an optional extra. |
Power Supply |
Factory set for 100, 115, 220 or 230 V AC, 49 - 62Hz. |
Power Consumption |
22 Watts typical/ 30 Watts maximum |